Textile printing and dyeing anti-mold agent, worthy of anti-corrosion small helper!
About:
Textile printing and dyeing anti-mildew agent is specially used for textile material anti-mildew processing, which can make the treated textiles have unique protective function and superior anti-mildew performance. It can prevent the harm caused by microorganisms, avoid the appearance of mold in the fabric, ensure the quality of the product, and extend the service life of the fabric. The treated fabrics fully meet the mildew resistance levels specified by the European standard EN 14119-2003, the national standard GB/T 24346-2009 "Evaluation of the mildew Resistance of Textiles", the American Society of Dyeing and Chemists standard AATCC 30-2004 and the Japanese standard JIS Z 2911-2010.
Appearance ………………………………… Colorless transparent liquid/light yellow liquid
Composition ……………………………… MIT,BIT, isothiazolinone, etc
Active content (%) …………………… > 15
Note: The values listed in this data table only describe the typical properties of this product and do not represent the specification range.
Features:
1, high active ingredients, strong anti-corrosion, effective against various bacteria, fungi, mold and so on.
2, quickly and irreversibly control and kill bacteria, fungi, mold and other microorganisms, in high temperature and acid alkaline conditions stable preservation.
3, simple operation, stable performance, easy to use, no irritation to the skin and eye mucosa under the use concentration, no pollution to the environment.
Application and usage:
It is suitable for cotton, polyester, polyester, nylon and other fabrics, and the method of treating the fabric can be dipped, impregnated, spray, coating, brushing. The usual dosage is 0.2-0.3% (o.w.f.), and the specific amount is determined according to the variety and use of the fabric being treated.
1. Dip method
Dosage: 20-40 g/l; Room temperature dipping; Rolling rate: 70%;
2. Dipping method
Dosage: 2-4% (o.w.f.); Time: 20-30 minutes; Direct dehydration;
