Anti-mildew agent for bathroom sealant: Long-lasting antibacterial solution under 0-level anti-mildew standard

18-11-2026

Bathroom sealant is one of the most stubborn breeding grounds for mold in the kitchen and bathroom space. The seams between the countertop and the wall, the junctions between the shower window glass and the tiles, and the sealing edges of the toilet base and the floor - these areas are constantly exposed to water vapor, soap residue accumulation, and temperature fluctuations. Within a month or two, black mold spots often appear on the surface of silicone sealant as a norm. Mold not only damages the appearance of the sealant but also, when the mycelium penetrates into the gel body, causes the sealant to fail and the sealant strips to fall off, releasing spores that are more likely to affect indoor air quality. The core value of using mold inhibitors in bathroom sealant lies in embedding the mold-resistant active components into the sealant matrix during the formulation stage, making the antibacterial ability an inherent property of the sealant strip rather than relying on surface treatments that are easily washed away by water.


The mold resistance standard threshold of bathroom sealant

The mold resistance performance evaluation of bathroom sealant has clear standards and the threshold is continuously tightening.

JC/T 885-2016 "Building Anti-Mold Sealant" is a core product standard in the building materials industry, stipulating that the mold resistance grade of anti-mold sealant usually needs to reach level 0 or 1. GB/T 13477.25-2024 (implemented in April 2025) is the first national standard method for mold resistance of sealants, unifying the testing process and rating system. Level 0 represents no mold growth under a 50x magnification, which is the highest mold resistance level. The test conditions are 28℃ ± 2℃, relative humidity above 90%, using 9 types of mixed molds such as black Aspergillus, yellow Aspergillus, and green wood mold for 28 days. For bathroom sealant products claiming mold resistance function, level 0 is the common determination standard for high-end kitchen and bathroom and medical food scenarios.

This standard system has clear requirements for mold inhibitor selection: the mold-resistant active components need to remain stable in the curing system and storage conditions of the sealant, be effective in a long-term humid environment, and not be rapidly lost due to water immersion.

Dalian Tianwei Bathroom Sealant Mold Resistance Solution: Technical Adaptation


Dalian Tianwei has developed a dedicated mold-resistant and antibacterial solution for the sealant system. Tianshi Lantian SOT is recommended as the core product for sealant antibacterial and mold resistance, suitable for various systems such as polyurethane sealant, polysulfide sealant, and acrylic sealant.


Broad-spectrum inhibition and dosage design

Dalian Tianwei SOT only requires a low dosage to prevent bacteria and mold from growing and causing mold spots on the sealant product. The recommended dosage range is 0.15% - 0.3%, and for outdoor or high-humidity environment sealants, it is recommended to increase to 0.2% - 0.4% to ensure the best antibacterial and mold resistance effect. This low dosage design has controllable impact on the physical properties of the sealant strip, without changing the elasticity, bonding strength, and curing speed.

In terms of mold coverage, Dalian Tianwei sealant mold inhibitors have broad-spectrum inhibition effects on common molds, fungi, and bacteria, especially showing significant effects on Aspergillus, Penicillium, and other main mold species in bathroom environments.


Temperature resistance and anti-loss: Adaptation for sealant processing and use

The production and curing process of sealants involve certain temperature conditions. If the mold inhibitor decomposes and fails at this stage, subsequent protection will be impossible. Dalian Tianwei sealant mold inhibitors have a temperature resistance of up to 300℃, maintaining stable activity within the processing temperature window and not decomposing or evaporating. In terms of anti-loss, the product design takes into account the special nature of the high-humidity environment in bathrooms, with the mold components not being easily washed away by water after the sealant solidifies, helping to maintain a long-term mold resistance effect.


Compatibility and appearance retention

Bathroom sealants have clear requirements for color stability. Yellowing or discoloration of white and transparent sealant strips will directly affect the quality of the finished product. Dalian Tianwei chemical SOT is compatible with most polymer formulation systems, will not cause color change or weaken the physical and chemical properties of the product, and can be added at the mixing stage to ensure uniformity. For transparent sealants, the uniformity of the dispersion of the anti-mildew components is equally crucial. The pre-dispersion process helps to prevent the formation of clumps, which could lead to an increase in haze or appearance defects.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy